KOGEL PF30A-386 for 30MM
Description
Warranty
SEAL OPTIONS
Cross Seals (Green)
Road Seals (Blue)
We always encourage and recommend the use of Cross seals where possible.
FITMENT
46mm diameter
SHELL WIDTH
73/83mm - Offset
* Also known as PF30A73 & PF30A83
COMPATIBILITY
This bottom bracket fits most 30mm crank sets on a PF30A frame. PF30A is an asymmetric bottom bracket found on Cannondale carbon frames: SuperSix Evo, SystemSix and Slice.
Just make sure the spindle is not too short, like BB30 crank sets from years past. To install a Cannondale crank on any of these bikes, choose a standard PF30 bottom bracket.
ABOUT
Kogel Hybrid bearings use premium grade Silicon Nitride (Si3n4) Bearings and premium hardened steel bearing races which are mirror polished to perfection. The result? A long lasting, smooth bearing which provides less resistance and is less prone to failures. These bearings are rated to the Grade 3 / ABEC 5 level - built to spin with minimal friction.
All Kogel bearings come with a "1 + 1" Warranty.
Year 1 - we employ the "very few questions asked" method...
Year 2 - we ask that a full service be undertaken to ensure contamination is not the cause of issue prior to processing a warranty claim.
Services are undertaken at a low cost and is something we recommend yearly anyway - a great way to keep your bearings happy and healthy.
Cross Seals (Green)
Road Seals (Blue)
We always encourage and recommend the use of Cross seals where possible.
FITMENT
46mm diameter
SHELL WIDTH
73/83mm - Offset
* Also known as PF30A73 & PF30A83
COMPATIBILITY
This bottom bracket fits most 30mm crank sets on a PF30A frame. PF30A is an asymmetric bottom bracket found on Cannondale carbon frames: SuperSix Evo, SystemSix and Slice.
Just make sure the spindle is not too short, like BB30 crank sets from years past. To install a Cannondale crank on any of these bikes, choose a standard PF30 bottom bracket.
ABOUT
Kogel Hybrid bearings use premium grade Silicon Nitride (Si3n4) Bearings and premium hardened steel bearing races which are mirror polished to perfection. The result? A long lasting, smooth bearing which provides less resistance and is less prone to failures. These bearings are rated to the Grade 3 / ABEC 5 level - built to spin with minimal friction.
All Kogel bearings come with a "1 + 1" Warranty.
Year 1 - we employ the "very few questions asked" method...
Year 2 - we ask that a full service be undertaken to ensure contamination is not the cause of issue prior to processing a warranty claim.
Services are undertaken at a low cost and is something we recommend yearly anyway - a great way to keep your bearings happy and healthy.
